The PJ135 as pictured, will be at the Miami Show in Feb. 2007

Palmer Johnson are currently working on two PJ135's as seen here and two PJ150's, with the third PJ150 already sold, as they start to gear up for the new PJ165 for early 2007. With such demand, work has already started on it's new production facilities at Sturgeon Bay, which would allow production to double from 4 to 8 hulls simultaneously.

With new production facilities already in the pipe-line, there are already designs on a PJ175 as the demand is for ever bigger "Sport Yachts". However, for the Miami show in February 2007, you will be able to see the pictured PJ135-1

This new 135 series offers 3 ft of extra beam, walk-around covered side decks and 5 staterooms, as well as a Jacuzzi
Mike Kelsey, President - Palmer Johnson Yachts

Specifications have been drafted for the PJ165, the fuel tank will be approx. 46,000 litres and at a moderate 60p per litre for marine diesel, filling her up would set you back £27,600, or by our reckoning the cost of a BMW 3-Series 318d M Sport!

You can always dream to own a PJ150

The design for the PJ165 has been designed by Nuvolari & Lenard with principle specifications as follows:-

LOA    50.9M
BEAM – Molded    9.5 M
DRAFT  - Max   2.44M
FUEL CAP.   46,000 L
FRESH WATER   6,800 L
CLASSIFICATION
•  Lloyds Register 100A1 SSC Yacht Mono LDC HSC G6 LMC
•  MCA Large Commercial Yacht Code (LY2), Marine and Coastguard Administration
• CONSTRUCTION
•  Aluminum hull, deck and superstructure, welded construction. Scantlings and plate to Classification requirements.

---

Add this page to your favorite Social Networking websites